DLP-1S 3D Printer Manual
Built for Production, High-Precision DLP 3D Printer
DLP stereolithography 3D printers take industrial 3D printing to a whole new level, offering unparalleled precision, proven repeatability, extremely tight tolerances, and an exceptionally smooth surface finish. Delivering injection molding accuracy unmatched by other resin 3D printers, it enables short-run production and on-demand manufacturing for applications requiring exceptional quality and high part performance. Combined with the broad range of high-performance materials in its open material system, it is the most advanced industrial production 3D printing solution.
Bringing the advantages of additive manufacturing for high-mix, low-volume production to high-precision applications
• Ideal for low-volume production, accommodating tight tolerances and large, complex parts
• Open material system: Choose the most suitable high-performance material from a validated list
• Complete flexibility: Use your own materials and print settings with open material licenses
• Reduce supply chain risk by in-house production, especially for applications requiring accuracy, repeatability, and injection molding quality
• Improve the quality of high-precision part production by minimizing reliance on first-party manufacturers and consolidating multi-component parts into a single SKU
Repeatable accuracy, tight tolerances, and surface finish
• Higher-performing projectors with proven application accuracy down to 50 microns
• Light engine irradiance levels result in parts with higher green strength and performance, mimicking final-stage properties
• Patented pneumatic mechanism reduces separation force, achieving results in less than 20 Achieve smooth molded surfaces at print speeds of 1000 m/h
• Validated post-processing workflows, rigorously tested internally and externally
Physical properties of functional end-use parts
Not only do you get access to the industry’s broadest range of high-performance materials, but you also get a system that can accurately and repeatably print a wide range of materials—from high-temperature resins to high-viscosity materials. Its heated build chamber can continuously control temperatures up to 60°C, while the new DLP light engine, with 5 mW/cm² irradiance, prints parts with high strength and very near-final-stage properties, right off the printer. Curing takes only minutes, and with our validated curing options, you can maintain part performance and quality. Unlike other 2K material solutions, the DLP-1S has no resin tank life limitations that could restrict post-processing.
Suitable Materials for Printing Applications
Highly Corrosion-Resistant Materials
With a heat deflection temperature of 285°C, materials are available that meet specific application requirements, such as flame, smoke, and toxicity, heat deflection temperature, or mold durability.
Strong Materials
High flex and tensile strength, impact-resistant resin for functional applications, such as those requiring performance under pressure and high loads.
General-Purpose Materials
Suitable for molds and tools requiring high precision, surface finish, and durability at low to medium temperatures, with a temperature resistance up to 100°C.
Elastic Materials
Impact-resistant resin for functional applications, offering excellent cushioning, resilience, and long-term durability.
Medical Materials
Medically certified materials with biocompatibility for devices requiring the highest aesthetics, durability, and biocompatibility.
Key Parameters
Build Dimensions: 144x81x190mm
Pixel Size: 75µm
Technology: Low-peel DLP (DLP) light-curing technology
Layer Thickness: 0.025-0.1mm
Build Speed: Up to 40mm/hour
Reference Materials: 601, 807, 807C, 808,
Consumable Filament: 809
Consumable Capacity: 1kg
Hardware
Optical System: LED light source, Texas Instruments DMD chip
Light Source Wavelength: 405nm
Resolution: 1920×1080 pixels
Door Control: Pause printing when door is opened (configurable)
Build Environment: Heated resin tank floor
Air Filtration: Built-in air filtration in the build chamber
Touchscreen: 7-inch color capacitive touchscreen
Transmission Methods: USB 2.0, Wi-Fi, Ethernet
Power Requirements: 100-240VAC, 50/60Hz
Power Consumption: 250W
Software
Operating System: Windows July/August/October/November
File Input Formats: .stl, obj
File Output Formats: .rs, .shape
Slicing Software: Shapeware
Advanced Features: Support Editing, Auto-Repair, Model Cutting, Shelling, Punching, Labeling
Network Transmission: Supports one-click sending and managing print jobs within a LAN
Cluster Management: Manage print jobs for multiple devices within a LAN
Software Languages: Simplified Chinese, Traditional Chinese, English, Japanese
Dimensions and Weight
Device Dimensions: 420 x 400 x 604 mm
Total Dimensions with Door Open: 600 x 400 x 800 mm
Net Weight: 26 kg
Packaging Dimensions: 570 x 540 x 850 mm
Packaging Weight: 40 kg