806 Photosensitive Resin for 3D Printing Stamping and Casting
Product Description:
Name: 3D Printing Stamping and Casting Resin
Model: 806
Color: Red
Packaging: Plastic Bottle
Specifications: 500g/1000g
Wavelength: Suitable for LCD and DLP 3D printers with an LED light source wavelength of 365nm-405nm.
Brand: Dayoude
Origin: Guangzhou, Guangdong
Introduction:
Dayoude, a red wax resin specifically developed for the stamping and casting jewelry molding process for DLP and LCD 3D printers, provides reliable casting for all types of jewelry designs.
Features:
1. Whether using water-jet, silicone, or rubber molds, the prints are remarkably smooth and detailed, and the resin’s elasticity allows for easy release from the mold.
2. Models can produce extremely high-resolution details, capturing fine features and making them ideal for small holes and fine needles.
3. Dayoude brand stamping and casting resin is durable and not prone to shrinkage. 4. The resin has waxy properties and leaves no ash or residue after high-temperature combustion.
Technical Parameters:
Test Item Test Results
Viscosity 260-350 cps @ 25°C
Critical Exposure Energy 6-7.5 mJ/cm²
Tensile Strength 36-52 MPa
Tensile Modulus 1,799-2,385 MPa
Elongation at Break 8-16%
Notched Impact Strength 44-49 J/m
Heat Deflection Temperature 81°C
Shore Hardness 78D
Note: The above values may vary depending on part geometry, print settings, temperature, and post-curing. Therefore, users must test the product before use to ensure that it meets their end-use performance requirements. The above values are typical and are not considered binding material specifications or guarantees unless expressly agreed to in writing. Final results will depend on the user’s actual use. This table is for reference only.
