Lost Wax Casting Resin
Our 3D printing lost wax casting resin is a high-precision photopolymer resin specially developed for investment casting. It features low ash content, clean burnout, excellent dimensional accuracy and smooth surface finish. No residue remains after burning out during the casting process, which effectively avoids defects such as pores and sand holes on metal castings. Compatible with most DLP & LCD 3D printers, it is widely used to produce high-detail wax patterns for metal casting.
| Model | Attributes | Features | Appearance | Viscosity | Critical exposure energy | Tensile Strength (MPa) | Tensile modulus (MPa) | Bending strength (MPa) | Flexural modulus (MPa) | Elongation(%) | Notched impact strength (J/m) | Heat distortion temperature (℃) | Shore hardness (D) | Glass transition temperature（℃） |
| （cps@25℃） | ( mJ/cm2 ) | ASTM D638 | ASTM D638 | ASTM D790 | ASTM D790 | ASTM D638 | ASTM D256 | ASTM D 648 @66PSI | ||||||
| 801 | Casting resin | General purpose, fast speed, high hardness, suitable for large-size industrial model casting (medium wax) | blue | 150-220 | 8.9~9.5 | 36-52 | 1500-1800 | – | – | 4-8 | – | 50 | 78 | – |
| 802 | Casting resin | Good hardness, suitable for dentistry (high wax) | green | 80-150 | 8.1~9.0 | 36-52 | 1700-2335 | – | – | 4-8 | – | 55 | 81 | – |
| 804 | Casting resin | General purpose, fast speed, high hardness, suitable for large-size industrial model casting (medium wax) | blue | 150-220 | 8.9~9.5 | 36-52 | 1500-1800 | – | – | 4-8 | – | 50 | 78 | – |
| 803 | Casting resin | Pewter-like casting resin, high precision, good toughness, jewelry (high wax) | multiple colour | 150-200 | 8.1~9.0 | 27-38 | 1410-1700 | – | – | 8-12 | – | 50 | 75 | – |
| 806 | Pressure glue casting resin | High-temp, good elasticity, high precision, easy demoulding (imitation red wax resin) | multiple colour | 260-350 | 6-7.5 | 36-52 | 1799-2385 | 59-70 | 1882-2385 | 8-16 | 44-49 | 81 | 78 | 120 |
The wavelength of LED light source is 385nm-405nm, suitable for LCD transmission light (light intensity) \DLP reflected light (high light intensity).
Applications：
·Watch accessories casting
·Jewelry casting: rings, bracelets, pendants and precious metal ornaments
·Precision hardware & small mechanical parts casting
·Dental crown and framework casting
·Art craft and sculpture casting
- Shake well before use, then pour into the resin tank;
- This resin must not be mixed with other resins, liquids, or substances, as doing so may result in a failed print;
- Low temperatures may affect print quality; preheat the resin slightly before use (do not exceed 35°C);
- While using this product, be sure to wear protective gloves and a mask, and keep the room well-ventilated;
- This product contains active chemical substances; avoid contact with eyes, skin, and clothing;
- This product may cause mild irritation to the eyes and skin. If it accidentally comes into contact with the eyes, rinse immediately with plenty of water and seek medical attention promptly;
- If this product comes into contact with the skin, rinse immediately with soap and water; if it comes into contact with clothing, wash thoroughly before wearing;
- Keep this product out of reach of children and away from pregnant women.
- Translated with DeepL.com (free version)