Product Description:
Name: High-Toughness Photosensitive Resin for 3D Printing
Model: 603A
Color: Various colors
Packaging: Bottled
Specifications: 500g/1000g
Introduction: 603A is a tough, photocurable resin that produces durable, tough, waterproof, and low-shrinkage parts.
Compatible Printers: LCD 3D printers and DLP 3D printers with LED light sources operating in the 365nm-405nm wavelength range.
Product Features:
01. High Toughness
The material boasts a high elongation at break, offering a degree of wear and impact resistance.
02. Tapping Capability
The cured model achieves a hardness of 75D, making it impact-resistant and tappable, with smooth cuts and minimal cracking.
03. Low Shrinkage
Designed to minimize shrinkage, ensuring dimensional stability of the printed model.
04. Highly Detailed
Reproduces high-resolution details with a tip edge accuracy of 10 microns, ensuring consistent structure and pattern reproduction with the CAD design. 05 Excellent Stability
The high-toughness resin maintains color separation, discoloration, and caking over time, ensuring the durability of printed models. The resin is guaranteed for 12 months.
06 Dimensional Stability
Designed to minimize shrinkage, this ensures the dimensional stability of printed models.
Technical Parameters:
Test Item Test Results
Viscosity 260-350cps@25°C
Critical Exposure Energy 8.1-9.0mJ/cm²
Tensile Strength 46MPa
Tensile Modulus 2,200MPa
Elongation at Break 4-8%
Notched Impact Strength 15-25J/m
Heat Deflection Temperature 63°C
Shore Hardness 75D
Note: The above values may vary depending on part geometry, print settings, temperature fluctuations, and post-curing. Therefore, users must test the product before use to ensure that it meets their end-use printing performance requirements. The above values are typical values and are not binding material specifications or guarantees unless expressly agreed to in writing. The final effect depends on the actual usage of the user. This table is for reference only.
