Flexible resin 609

3d printing Uv flexible resin 609

609 flexible resin is a resin with excellent toughness. It is designed to print parts with a balance of softness and strength. Excellent toughness is more reflected in the printed sheet parts, 85-90A resin can withstand bending, bending and compression repeatedly. 3d printing Uv flexible resin,tear-resistant. Used for gums and soft trays.

If the model has a thick layer, it will get a harder touch. The printed model can withstand impact pressure and can be tapped. This material is very suitable for applications with cushioning, damping and shock absorption properties.

Introduction: 

The soft adhesive resin 609 resin is a high elastomeric resin that quickly recovers its original shape after compression or bending and has excellent tear resistance. It is designed for printing highly flexible parts.

Applicable printers: 

LCD 3D printers and DLP 3D printers with LED light source wavelength 365nm-405nm.

Product features：

01、High elasticity

The material has outstanding elongation at break, and the completed cured model can be folded and not easily broken.

02, High Precision

609 is a high toughness 3D printing material, capable of printing extremely accurate and highly detailed parts.

03 Low Shrinkage

Designed to reduce volume shrinkage, it ensures the dimensional stability of printed models.

04 High Flexibility

The material features high flexibility and a soft feel. Two hardnesses are available: 25A extra soft and 45A slightly hard.

05、Excellent stability

The resin is not stratified, not discolored, not lumpy after long time, the printed model is durable and the resin is guaranteed for 12 months.

06.Strong durability

The resin is easy to store. It can be stored in a humid environment without absorbing moisture, and has high durability.

Material property data

Notice：The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance.

the causes of delamination and discoloration.

In general, ordinary 3D printing resin products will inevitably have the problem of resin lamination at the bottom. 

Discoloration × 

This is because some color paste contained in the opaque color resin will precipitate at the bottom after a long time, resulting in the appearance of layered resin at the bottom. 

Color stratification ×

Although many businesses advise consumers to thoroughly shake the resin before use so that it can be reused to remove sediment from the bottom. However, if left too long, the sediment can become thicker, making it difficult for consumers to shake well.

Uniform color √

This not only affects the light transmittance of the resin, but also directly affects the curing speed and accuracy of the model, which may lead to printing failure in serious cases.

So our core technology is to try to solve this problem. No matter how long it is placed, there will be no sediment at the bottom, which will not affect the light permeability of the resin, so that the resin can be formed to the best effect.

Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.

instructions

l Shake well before use and then pour into resin tank;

l During the use, wear protective gloves and keep the room ventilated;

l This product contains reactive chemicals, avoid contact with eyes, skin and clothing;

l This product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;

l Please wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;

l Keep the product away from pregnant women and children.

Storage and transportation

l The resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

l The recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

l After printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

l For safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.