Rigid Resin 606

Rigid 3d printing light-curing resin

PRODUCTS：

606 is a material for rapid curing of high resolution prototypes. Our carefully developed resin captures the crisp details of your design in your application. The cured prototype can show good hardness and strength and can be knocked. The properties are similar to those of a general purpose hard resin made of ABS.

Name: 3D printing rigid photosensitive resin

Model: 606

Color: various colors

Package: Bottle

Specification: 500g/1000g

Suitable printers:

LCD 3D printer and DLP 3D printer with LED light source wavelength 365nm-405nm.

Applications:

It is used to print various models. After printing, the model has high hardness and strength and is not easy to be damaged.

Product features：

01、Fast curing

Its good fluidity greatly reduces the printing time.

02、High precision

606 rigid resin can capture fine features and print highly detailed models.

03、Low shrinkage

Designed to reduce volume shrinkage, it ensures dimensional stability of printed models.

04、Excellent physical properties

606 has excellent mechanical strength and hardness, and can be tapped directly.

05、Excellent stability

The resin does not stratify or change color after long placement, does not clump, and the printed model is highly durable, with a 12-month resin warranty.

06、Strong durability

The resin is easy to store. It can be stored in a humid environment without absorbing moisture, and has strong durability.

TECHNICAL PARAMETERS：

Note: The above values may vary with part geometry, print settings, temperature changes, secondary post-curing, etc. The actual values may change, so the user must test the product before use to ensure that it will meet your end-use requirements for print performance. The above values are typical values and we do not agree to them as binding material specifications or warranties unless expressly agreed to in writing. The final results depend on the actual use of the user, and this table is for reference only.

CAUTIONS：.

lShake well before use before pouring into the resin tank.

lSealed in room temperature to avoid high temperature and sunlight.

lThe recommended temperature is 18-35 ℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35 ℃).

lIf the resin pigment settles, it can be used after stirring or shaking. 

lIt is forbidden to be exposed to strong light sources such as high power and high pressure mercury lamps for a long time.

For safety information, please refer to the MSDS of this product. If you have any problems with your application, please feel free to contact us.

STORAGE AND TRANSPORT：

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.