Super CLear Resin 605B

3D printing high transparent photosensitive resin

Introduction：

605B Suitable for LCD/DLP printers with wavelength of 365-405nm.Highly transparent, yellowing resistance, good toughness, medical equipment Ⅱa class dental splint

Features：

01Strong flexibility

The cured brace prototype is flexible and flexible, which not only enables it to withstand greater pressure, but is not prone to breakage.

02Low shrinkage

It is specially designed to reduce volume shrinkage, ensuring the dimensional stability of the printed model.

03Smooth and delicate surface

Based on the upgraded formula developed by our company, after the high-transparent prototype is cured, it can show a smooth surface, and the texture is delicate, without stacking, and not rough.

04High transparency

Dayoude uses imported raw materials to upgrade the highly transparent formula, and is committed to improving the transparency of the cured brace prototype. It can be close to a lens-like visual experience and is resistant to yellowing.

05Material stability

The liquid resin will not agglomerate after being stored for a long time, and the unused resin will be guaranteed for 12 months from the date of delivery.

06Good durability

The resin is easy to store. It can be stored in a humid environment without absorbing moisture, and there is no chemical reaction in the oral cavity, so it has strong durability.

TECHINCAL DATA：

Notice：

The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.

presentation：

instructions：

lShake well before use and then pour into resin tank;

lDuring the use, wear protective gloves and keep the room ventilated;

lThis product contains reactive chemicals, avoid contact with eyes, skin and clothing;

lThis product have slight irritation on eyes and skin. If you contact your eyes inadvertently, rinse immediately with plenty of water and seek medical advice in time;

lPlease wash with soapy water immediately after contacting with skin; wash thoroughly after contacting with clothes before wearing;

lKeep the product away from pregnant women and children.

Storage and transportation：

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.