Rigid Resin 603

Washable resin suitable for sinking lcd/dlp printers

Product description：

The standard resin 603# from the washable series is a photopolymer resin similar to ABS, with unique characteristics for professionals and amateurs. It is a kind of resin that is easy to clean. You can directly rinse the model with dirt on the surface with clean water. In this process, you can use auxiliary tools such as brushes, so you don't need to use soapy water.

It can print models with a smooth surface and a high degree of detail. Due to the low shrinkage rate, about 2% +/- 1%, it is very suitable for models that require dimensional stability. This material has good toughness, can be tapped and polished, and is suitable for applications that require good impact resistance, its hardness reaches 81D.

Introduction：

Type 603 is a rigid light-curing resin that creates durable, tough, waterproof and low-shrinkage parts.

Applicable printers：

LCD 3D printers and DLP 3D printers with LED light source wavelength 365nm-405nm.

Product features：

01、High hardness

Cured models have a hardness of 81D, providing superior hardness and durability.

02、Tappable

After curing, the hardness of the model reaches 75D, which is resistant to punching and tapping, and the cut is flat and not easy to crack.

03、Low shrinkage

Specially designed to reduce volume shrinkage, ensuring the dimensional stability of the printed model.

04、High detail clarity

Capable of showing high-resolution details with a tip edge accuracy of 10 microns, presenting the same structure and pattern as in the CAD pattern.

05、Excellent stability

High toughness resin does not delaminate or change color after long time, no lumping, good durability of printed model, 12 months warranty of resin.

Material property data

Model picture：

CAUTIONS：

lShake well before use and pour it into the resin tank;

lThis resin cannot be mixed with other resins, liquids, substances, etc., otherwise it will cause printing failure;

lThe lower temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃);

lDuring use, pay attention to wearing protective gloves and masks, and keep the room ventilated;

lThis product contains active chemicals, this product should avoid contact with eyes, skin and clothing;

lThis product is slightly irritating to eyes and skin. If you accidentally contact your eyes, please rinse immediately with plenty of water and seek medical attention in time;

lAfter this product comes into contact with the skin, please wash it with soap and water immediately; after contact with clothing, wash it thoroughly before wearing it;

lAvoid contact of children and pregnant women with this product.

STORAGE AND TRANSPORT：

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.