Tough resin 603A

                                                                                                                  3D printed rigid water-washable photosensitive resin

PRODUCTS：

603A is a tough, light-curable resin that produces durable, tough, waterproof and low shrink parts. It is a kind of resin that is easy to clean. You can directly rinse the model with dirt on the surface with clean water. In this process, you can use auxiliary tools such as brushes, so you don't need to use soapy water.

The high elongation at break of the material is high, and it has certain wear resistance and impact resistance.It can print models with a smooth surface and a high degree of detail. High-resolution detail with 10-micron tip edge accuracy, showing structures and patterns consistent with CAD patterns.

Standard resin 603# is matched with a 4K monochrome 3D printer, which is easy to demold during the printing process, resist tensile fracture, effectively shorten the curing time of the model, the layer thickness is 25-300 microns, and the speed can reach 2 seconds! And the material uses environmentally friendly raw materials imported from Europe, America and Japan, which has the characteristics of low odor and low irritation.

Suitable printers:

LCD 3D printer and DLP 3D printer with LED light source wavelength 365nm-405nm.

Applications:

Electronic product shell; functional prototype; exhibition model; end-use parts

FEATURES：

01 High toughness

High elongation at break of the material is high, with certain wear resistance and impact resistance.

02 Tappable

After curing, the hardness of the model reaches 75D, which is resistant to punching and tapping, and the cut is flat and not easy to crack.

03Low shrinkage

Specially designed to reduce volume shrinkage, ensuring the dimensional stability of the printed model.

04High detail clarity

Capable of showing high-resolution details with a tip edge accuracy of 10 microns, presenting the same structure and pattern as in the CAD pattern.

05Excellent stability

High toughness resin does not delaminate or change color after long storage and does not clump, and the printed model is highly durable with a 12-month resin warranty.

06 Dimensional stability

Specially designed to reduce volume shrinkage, ensuring the dimensional stability of printed models.

Material property data

Notice：The above values may vary depending on the geometry of the part, printing settings, temperature changes, secondary post-curing, etc. The actual values may vary. Therefore, users must test the product before use to ensure that it can meet your final use of printing performance. Require. The above values are typical values and we do not agree with them as binding material specifications or warranties unless expressly agreed in writing. The final effect depends on the actual usage of the user, this table is for reference only.

CAUTIONS：

lShake well before use and pour it into the resin tank;

lThis resin cannot be mixed with other resins, liquids, substances, etc., otherwise it will cause printing failure;

lThe lower temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃);

lDuring use, pay attention to wearing protective gloves and masks, and keep the room ventilated;

lThis product contains active chemicals, this product should avoid contact with eyes, skin and clothing;

lThis product is slightly irritating to eyes and skin. If you accidentally contact your eyes, please rinse immediately with plenty of water and seek medical attention in time;

lAfter this product comes into contact with the skin, please wash it with soap and water immediately; after contact with clothing, wash it thoroughly before wearing it;

lAvoid contact of children and pregnant women with this product.

STORAGE AND TRANSPORT：

lThe resin should be sealed and stored in the original package at home temperature in a dark area to avoid high temperature and sunlight.

lThe recommended temperature is 18-35℃, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 35℃).

lAfter printing the resin, the resin left in the tank of 3D printer should not be mixed and used with the unused resin. It should be stored in another light-proof container.

lFor safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.